Mono Sync DK by Behringer
Oscillator 1 timbre
Only square oscillators are enabled, resulting in a narrow sounding tone.
Pulse width of square oscillator is manually set to 78% (50% is perfectly square, 100% is very short pulsewave).
Oscillator 2 timbre
Volume level for oscillator 2 is manually set to 255.
Tone for oscillator 2 is set to 50 and is modulated by Mod Env.
Mod Env mod-matrix 1 modulation amount for tone for oscillator 2 is 54.
Volume (VCA) volume
Amplification level is set to 6dB (255) and is modulated by VCA Env.
VCA Env direct modulation amount for amplification level is 255.
Pan spread is manually set to 64.
OSC 1→2 sync timbre
to be completed
Oscillator 2 is syncronized to oscillator 1. This generates rich harmonic content when changing oscillator's relative piches.
High-pass filter (HPF) timbre
High-pass filter cut-off frequency is set to 20Hz (0) and is modulated by Mod Wheel.
Mod Wheel mod-matrix 4 modulation amount for high-pass filter cut-off frequency is 105.
Low-pass filter (VCF) timbre
Low-pass filter cut-off frequency is set to 284.5Hz (74) and is modulated by Note Vel, LFO 2, VCF Env, Mod Env.
LFO 2 direct modulation amount for low-pass filter cut-off frequency is 90.
VCF Env direct modulation amount for low-pass filter cut-off frequency is 141.
Mod Env mod-matrix 5 modulation amount for low-pass filter cut-off frequency is 86.
Low-pass filter envelope amount is modulated by Note Vel, Note Num.
Note Vel direct modulation amount for low-pass filter envelope amount is 128.
Note Num direct modulation amount for low-pass filter envelope amount is 62.
Filter has no resonance.
Oscillator drift & unison detuning timbre
Unison detune level is set to ±0 cents (0) and is modulated by Mod Wheel.
Mod Wheel mod-matrix 3 modulation amount for unison detune level is 60.
Oscillators drift level is manually set to 105. Drift rate is 0
Oscillator 2 pitch pitch
Oscillator 2 pitch is set to -12 semitones and is modulated by Mod Env.
Mod Env mod-matrix 2 modulation amount for oscillator 2 pitch is 46.
FX routing & levels fx
FX mode is set to Send, and routing is
Effect 1 level is manually set to 0. Effect 2 level is manually set to 100. Effect 3 level is off. Effect 4 level is off.
Flange & Reverb fx
not yet complete
TC Deep Reverb fx
not yet complete
Mod Wheel modulator
Controls Unison Detune, HPF Cut-off Frequency, TC Deep Reverb Param 5.
| function | type | destination | amount |
|---|---|---|---|
| timbre | matrix | Unison Detune | 60 |
| timbre | matrix | HPF Cut-off Frequency | 105 |
| fx | matrix | TC Deep Reverb Param 5 | 127 |
Note Num modulator
Controls VCF Keyboard Tracking.
| function | type | destination | amount |
|---|---|---|---|
| timbre | fader | VCF Keyboard Tracking | 62 |
Note Vel modulator
Controls VCF Cut-off Frequency, VCF Envelope Velocity Sensitivity.
| function | type | destination | amount |
|---|---|---|---|
| timbre | fader-indirect | VCF Cut-off Frequency | 141 |
| menu | VCF Envelope Velocity Sensitivity | 128 |
LFO 2 modulator
Controls VCF Cut-off Frequency.
| function | type | destination | amount |
|---|---|---|---|
| timbre | fader | VCF Cut-off Frequency | 90 |
| name | value |
|---|---|
| LFO 2 Rate | 1.36Hz (121) |
| LFO 2 Delay / Fade | 0s (0) |
| LFO 2 Shape | Triangle |
| LFO 2 Key Sync | off |
| LFO 2 Arp Sync | off |
| LFO 2 Mono Mode | 0 |
| LFO 2 Slew Rate | 0 |
VCA Env modulator
Controls VCA Gain for All Voices.
| function | type | destination | amount |
|---|---|---|---|
| volume | menu | VCA Gain for All Voices | 255 |
| name | value |
|---|---|
| VCA Envelope Attack Time | 0s (0) |
| VCA Envelope Decay Time | 1.13s (128) |
| VCA Envelope Sustain Level | 68% (175) |
| VCA Envelope Release Time | 0s (0) |
| VCA Envelope Trigger Mode | Key (0) |
| VCA Envelope Attack Curve | 128 |
| VCA Envelope Decay Curve | 0 |
| VCA Envelope Sustain Curve | 128 |
| VCA Envelope Attack Curve | 0 |
VCF Env modulator
Controls VCF Cut-off Frequency.
| function | type | destination | amount |
|---|---|---|---|
| timbre | fader | VCF Cut-off Frequency | 141 |
| name | value |
|---|---|
| VCF Envelope Attack Time | 0.76s (103) |
| VCF Envelope Decay Time | 15.27s (208) |
| VCF Envelope Sustain Level | 23% (60) |
| VCF Envelope Release Time | 1.15s (129) |
| VCF Envelope Trigger Mode | Key (0) |
| VCF Envelope Attack Curve | 128 |
| VCF Envelope Decay Curve | 0 |
| VCF Envelope Sustain Curve | 128 |
| VCF Envelope Attack Curve | 0 |
Mod Env modulator
Controls OSC 2 Tone Modulation Depth, OSC 2 Pitch, VCF Cut-off Frequency.
| function | type | destination | amount |
|---|---|---|---|
| timbre | matrix | OSC 2 Tone Modulation Depth | 54 |
| pitch | matrix | OSC 2 Pitch | 46 |
| timbre | matrix | VCF Cut-off Frequency | 86 |
| name | value |
|---|---|
| Mod Envelope Attack Time | 1.13s (128) |
| Mod Envelope Decay Time | 19.9s (221) |
| Mod Envelope Sustain Level | 0% (0) |
| Mod Envelope Release Time | 1.13s (128) |
| Mod Envelope Trigger Mode | Key (0) |
| Mod Envelope Attack Curve | 128 |
| Mod Envelope Decay Curve | 0 |
| Mod Envelope Sustain Curve | 128 |
| Mod Envelope Attack Curve | 0 |